Application of double-exposure digital holographic interferometry method for calculating the absorbed dose in poly(methyl methacrylate) environment

Authors

10.22052/5.4.51

Abstract

Double-exposure digital holographic interferometry is a powerful and widespread technique for fine measurement of the induced changes in special physical properties, like density, refractive index and etc. In this paper, application of this technique for measuring the absorbed dose from an electron radiation source in poly (methyl methacrylate) material is studied through modeling. The method of applying this technique for interpretation of the resulted fringe pattern and obtaining the pattern of isodose regions and the percent depth dose curve, that are ubiquitously used for treatment planning and monitoring of the absorbed dose, is investigated. Our results prove the capability of this optical technique for online monitoring of the absorbed dose from a radiation source through interpreting the formed fringe pattern.
 

Keywords


[1] P. Lu, L. Men, K. Sooley, Q. Chen. Tapered fiber Mach–Zehnder interferometer for simultaneous measurement of refractive index and temperature. Appl. Phys. Lett. 94.13 (2009) 131110. [2] E.K. Hussman. A holographic interferometer for measuring radiation energy depositionpro_les in transparent liquids. Appl. Opt. 10(1971)182-186. [3] J.A. Devanney. The use of a holographic interferometer to measure absorbed energy distributions in water from pulsed electron beams. Nucl. Instrum. Methods. 120.1 (1974) 77-84. [4] WHO. WHO–Cancer. (2011) [cited 2011 9/52011]. [5] F.M. Khan, J.P. Gibbons. Khan's the physics of radiation therapy. Lippincott Williams & Wilkins, (2014). [6] E.B. Pogorsak. Radiation Oncology Physics:A Handbook for Teachers and Students. IAEA, (2005). [7] E.C. Halperin, L.W. Brady, D.E. Wazer, C.A. Perez. Perez & Brady's principles and practice of radiation oncology. Lippincott Williams & Wilkins, (2013). [8] A. Cavan, J. Meyer. Digital holographic interferometry: A novel optical calorimetry technique for radiation dosimetry. Med Phys. 41.2 (2014). [9] A. Miller, E.K. Hussmann, W.L. McLaughlin. Interferometer for measuring fast changes of refractive index and temperature in transparent liquids. Rev. Sci. Instrum. 46 (1975) 1635-1638. [10] A. Miller, W.L. McLaughlin. Holographic measurements of electron-beam dose distributions around inhomogeneities in water. Phys Med Biol. 21.2 (1976) 285. [11] A. Miller, W. L. McLaughlin. Imaging and measuring electron beam dose distributions using holographic interferometry. Nucl. Instr. Meth. 128.2 (1975): 337-346. [12] B. Grosswendt. The angular dependence and irradiation geometry factor for the dose equivalent for photons in slab phantoms of tissue-equivalent material and PMMA. Radiat Prot Dosim. 35.4 (1991) 221-235. [13] M.E. Poletti, O.D. Goncalves, I. Mazzaro. X-ray scattering from human breast tissues and breast-equivalent materials. Phys. Med. Biol. 47.1 (2001) 47. [14] A.K. Jones, D.E. Hintenlang, W.E. Bolch. Tissue-equivalent materials for construction of tomographic dosimetry phantoms in pediatric radiology. Med Phys. 30.8 (2003) 2072-2081. [15] J.L. Chartier, B. Grosswendt, G.F. Gualdrini, H. Hirayama, C-M. Ma, F. Padoani, N. Petoussi, S. M. Seltzer, M. Terrissol. Reference fluence-to-dose-equivalent conversion coefficients and angular dependence factors for 4-element ICRU tissue, water and PMMA slab phantoms irradiated by broad electron beams. Radiat. Prot. Dosim. 63.1 (1996) 7-14. [16] J.W. Cooley, P.A. Lewis, P.D. Welch. The fast Fourier transform and its applications. IEEE Trans. Edu. 12 (1969) 27-34. [17] U. Schnars. Direct phase determination in hologram interferometry with use of digitally recorded holograms. JOSA A.11 (1994) 2011-2015. [18] E.K. Hussmann, W.L. McLaughlin. Dose-distribution measurement of high-intensity pulsed radiation by means of holographic interferometry. Radiat. Res. 47.1 (1971) 1-14. [19] G. Beadie, M. Brindza, R.A. Flynn, A. Rosenberg, J.S. Shirk. Refractive index measurements of poly (methyl methacrylate)( PMMA) from 0.4–1.6 μm. Appl. Opt. 54.31 (2015) F139-F143. [20] L. Hongy, D.E. Day, J.O. Stoffer. Optical and mechanical properties of optically transparent poly (methyl methacrylate) composites. Polym Eng Sci. 32.5 (1992) 344-350. [21] M. Chahar, A. Vazid, K. Sushil. Spectral Investigations of Kiton Red-620 Doped Polymethylmethacrylate. MSA. (2012). [22] I. Jones, J. Rudlin. Process monitoring methods in laser welding of plastics. Proceedings of the conference joining plastics. (2006).