Study gamma radiation protection properties of silicon rubber-bismuth oxide nanocomposites: Synthesis, characterization and simulation

Authors

10.22052/4.4.37

Abstract

By use of silicon rubber as polymeric matrix and bismuth oxide as fillers, composite materials were fabricated up to 70 wt% and their gamma ray attenuation was studied. Due to the fair solubility of bismuth oxide particles in polymer matrix, the solution intercalation method is used for nanocomposite fabrication. The applied source for radiation attenuation test was 241Am with photon energies 59.5 KeV. The experimental results showed that the fabricated samples have high performance in low energy X ray shielding. For example, the 70% wt sample with the thickness 0.215cm is able to absorb 82% of photons of 241Am. To verify the experimental results, the attenuation process was simulated by MCNP-4C code and it was found that the simulation coincide with the experiment.
 

Keywords


[1] G.F. Knoll. Radiation detection and measurement. John Wiley & Sons, (2010). [2] F.A. Aharonian. Very high energy cosmic gamma radiation: a crucial window on the extreme Universe. World Scientific, (2004). [3] R.F. Landel, L.E. Nielsen. Mechanical properties of polymers and composites. CRC Press, (1993). [4] L. Liu, H. Lei, Y. Cheng, Z. Wan, J. Ri‐Guang, Z. Li‐Qun. In situ reaction and radiation protection properties of Gd (AA) 3/NR composites. Macromolecular rapid communications 25, no. 12 (2004), 1197-1202. [5] M.Z. Botelho, R. Künzel, E. Okuno, R.S. Levenhagen, T. Basegio, C.P. Bergmann. X-ray transmission through nanostructured and microstructured CuO materials. Applied Radiation and Isotopes 69.2 (2011), 527-530. [6] S.D. Kaloshkin, V.V. Tcherdyntsev, M.V. Gorshenkov, V.N. Gulbin. Radiation-protective polymer-matrix nanostructured composites. Journal of Alloys and Compounds, 536S (2012) S522–S526 [7] M.I. Alymov, I.V.Tregubova, K.B.Povarova, A.B. Ankudinov, E.V.Evstratov. Development of physicochemical foundations for the synthesis of tungsten-based nanopowders with controlled properties. Russian Metallurgy (Metally), (2006), 217-220. [8] V. Harish, N. Nagaiah, H. G. Harish. Lead oxides filled isophthalic resin polymer composites for gamma radiation shielding applications. Indian Journal of Pure and Applied Physics 50, no. 11 (2012), 847-850. [9] G.A. Eid, A.I. Kany, M.M. El-Toony, I.I. Bashter, F.A. Gaber. Application of Epoxy/Pb 3 O 4 Composite for Gamma Ray Shielding. Arab Journal of Nuclear Sciences and Applications, v. 46(2); p. 226-233 (2013). [10] S. Ivanov, S.M. Ivanov, S.A. Kuznetsov, A.E. Volkov, P.N. Terekhin, S.V. Dmitriev, V.V. Tcherdyntsev, M.V. Gorshenkov, A.A. Boykov. Photons transport through ultra-high molecular weight polyethylene based composite containing tungsten and boron carbide fillers. Journal of Alloys and Compounds. 586, (2014), S455-S458. [11] N.N. Azman, S. Siddiqui, and I.M. Low. Characterisation of micro-sized and nano-sized tungsten oxide-epoxy composites for radiation shielding of diagnostic X-rays. Materials Science and Engineering: C, 33(8), (2013), 4952-4957 [12] N.Z. Noor Azman, S.A. Siddiqui, R. Hart, I.M. Low. Effect of particle size, filler loadings and x-ray tube voltage on the transmitted x-ray transmission in tungsten oxide—epoxy composites. Applied Radiation and Isotopes. 71(1), (2013), 62-67. [13] S. Nambiar, J.T. Yeow. Polymer-composite materials for radiation protection. ACS applied materials & interfaces 4.11 (2012), 5717-5726. [14] S. Y. Fu, X. Q. Feng, B. Lauke, Y. W. Mai., Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites. Composites Part B 39 (2008) 933–961. [15] V. K. Tiwari, T. Shripathi, N.P. Lalla, P. Maiti. Nanoparticle induced piezoelectric, super toughened, radiation resistant, multi-functional nanohybrids. Nanoscale. 4, (2012), 167 −175. [16] P.M. Ajayan, L.S. Schadler, P.V. Braun. Nanocomposite Science and Technology. Wiley-VCH: Weinheim, Germany, Polymer‐Based and Polymer‐Filled Nanocomposites, (2003). [17] Chen S, Bourham M, Rabiei A, Radiation Physics and Chemistry, Novel light-weight materials for shielding gamma ray 96 (2014) 27–37. [18] J.P. McCaffrey, F. Tessier, and H. Shen, Med. Phys, Radiation shielding materials and radiation scatter effects for interventional radiology (IR) physicians. 39 (7), July (2012). [19] M.M. Abdel-Aziz, A.S. Badran, A.A. Abdel-Hakem, F.M. Helaly, and A. B. Moustafa. Styrene–butadiene rubber/lead oxide composites as gamma radiation shields. Journal of Applied Polymer Science, Vol. 42 (1991), 1073-1080. [20] R. S. Kaundal, S. Kaur, N. Singh, K. J. Singh. Investigation of structural properties of lead strontium borate glasses for gamma-ray shielding applications. J. Phys. Chem Solid 71, (2010), 1191 –1195. [21] Q. Lin, B. Yang, J. Li. Synthesis, characterization and property studies of Pb 2+-containing optical resins. Polymer 41, (2000), 8305–8309. [22] M. M. abdel-Aziz, A. S. Badran, A. A. Abdel-; F. M. Helaly, A. B. Moustafa. Styrene–butadiene rubber/lead oxide composites as gamma radiation shields. Journal of Applied Polymer Science, Vol. 42, (1991), 1073-1080. [23] V. Harish, N. Nagaiah,T. Niranjana Prabhu, K. T. Varughese. Preparation and characterization of lead monoxide filled unsaturated polyester based polymer composites for gamma radiation shielding applications. Journal of Applied Polymer Science, Vol. 112, (2009), 1503–1508. [24] L. Yvan, L. Pierre, Thermo-mechanical analysis of lead monoxide filled unsaturated polyester based polymer composite radiation shields. 1,384,603, GB 1034533 (1965). [25] J. M. MacLeod, R.H. Servant, R. Hector. Characterisation of micro-sized and nano-sized tungsten oxide-epoxy composites for radiation shielding of diagnostic X-rays. Eur Pat. 372,758, CA 2,003,879, Jpn 02,223,899, U. S. 5,278,219 (1990). [26] R. Hussain, Z.U. Haq, D.J. Mohammad. A study of the shielding properties of poly ethylene glycol-lead oxide composite. Isla AcadSci (1997), 10, 81. [27] M.M. Abdul Aziz, A.S. Badran, A.A. Abdel-Hakem, F.M. Healy, A. B. Moustafa. Styrene–butadiene rubber/lead oxide composites as gamma radiation shields. J ApplPolymSci (1991), 42, 1073. [28] M. M. Abdul Aziz, S. E. Gawaily. Development of physicochemical foundations for the synthesis of tungsten-based nanopowders. PolymDegrad Stab (1997), 55, 269. [29] V. I. Pavlenko; V. M. Lipkanskii, R. N. Yastrebinskii. Preparation and radiation attenuation performances of metal oxide filled polyethylene based composites for ionizing electromagnetic radiation shielding applications. J Eng Phys Thermophys (2004), 77, 11. [30] M.E. Cournoyer, R.L. Dodge. Pollution Prevention Benefits of Non-Hazardous Shielding Glovebox Gloves. J React Mat, 311-317 (2011). [31] H. Cember. Introduction to health physics. Weily (1969). [34] E. Matijević. Current Opinion in Colloid & Interface Science. Controlled colloid formation, 1.2 (1996), 176-183. [35] RadDecay.exe [37] C.M. Salgado. Validation of a NaI (Tl) detector's model developed with MCNP-X code. Progress in Nuclear Energy 59, (2012) 19-25. [38] H.T. Anbaran, R. Izadi-Najafabadi, and H. Miri-Hakimabad. The effect of detector dimensions on the NaI (Tl) detector response function. J Appl Sci 9 (2009), 2168-2173. [39] H. M. Hakimabad, H Panjeh, and A.Vejdani-Noghreiyan. Evaluation the nonlinear response function of a 3× 3in NaI scintillation detector for PGNAA applications. Applied radiation and isotopes. 65.8 (2007), 918-929. Conference, February 27 – March 3, (2011).