Volume 7, Issue 2 (6-2019)                   IJRSM 2019, 7(2): 25-34 | Back to browse issues page


XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Hashemi S R, Tajik M, Asadi-Amirabadi E. Design and manufacture of composite flexible shield for neutron-gamma mixed fields. IJRSM. 2019; 7 (2) :25-34
URL: http://rsm.kashanu.ac.ir/article-1-400-en.html
Damghan University
Abstract:   (879 Views)
In this study, a flexible composite shield with a combination of polyethylene, tungsten and boron carbide has been designed and constructed for neutron-gamma mixed fields. For this purpose, theoretical studies were conducted using the multi-purpose MCNPX Code. According to the results of simulation studies, a multi-purpose composite was constructed using a combination of a solid phase of boron carbide particles with tungsten metal powder and a mixture of different types of soft and hard polyethylene in a laboratory at the center of polymer and petrochemical industry in Iran. The 241Am-Be neutron flux attenuation rate and the cesium gamma flux attenuation were measured for the built shield. The results show that in the polyethylene /boron carbide / tungsten (PE / B4C / w) composite with respect to the micrometric dimensions of the reinforcing particles and the high cross-section of interactions of the radioactive beams with these particles, the composite shield with a much lower thickness than the ordinary shields has higher absorption of gamma and neutron beams. This shield containing 30% of tungsten and boron with a thickness of approximately 0.5 cm, absorbs 90% of the Americium-beryllium neutrons and at the thickness of 2 cm absorbs nearly 40% of the gamma rays of the 137Cs source.
 
Full-Text [PDF 5200 kb]   (267 Downloads)    
Type of Study: Research | Subject: Special

Send email to the article author


© 2021 All Rights Reserved | Iranian Journal of Radiation Safety and Measurement

Designed & Developed by : Yektaweb