Volume 4, Issue 3 (9-2016)                   IJRSM 2016, 4(3): 1-10 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Rasouli A, Tavakoli-Anbaran H. Study the location and the direction of detector in order to minimize the gamma-rays buildup factor. IJRSM. 2016; 4 (3) :1-10
URL: http://rsm.kashanu.ac.ir/article-1-198-en.html
Faculty of physics, Shahrood university
Abstract:   (6179 Views)

The purpose of this study is to select the best place for the detector towards shield and the gamma source which have the least flux buildup factor of the photon. In this research, the flux buildup factor of gamma rays was calculated by using of MCNP-4C code for cylindrical sources 137Cs, 60Co, 16N coaxial shields made up of aluminum, iron and lead with a constant thickness 1.55 cm in detector CsI (Tl). For this purpose, detector was respectively placed at different distances from 9 to 18 cm and different angles from 30 to 150 degrees with respect to the axis of the source. In this study, we tried to assess the dependency of the buildup factor with material atomic number, gamma-ray energy, relative distance of detector-material-source and angle of detector to source. The obtained results showed that the buildup factor values are variable in a wide range from 1 to 3.5. According to the results of simulation, if the aim is reduction of the buildup factor source, shield and detector should be designed parallel and coaxial. Otherwise, whatever deviation of detector from the central axis is increased, the gamma-rays buildup factors are greater in detector.

Type of Study: Research | Subject: Special

Send email to the article author

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2021 CC BY-NC 4.0 | Iranian Journal of Radiation Safety and Measurement

Designed & Developed by : Yektaweb